Need help?Do you have a question about the Lexicon MPX 500 and is the answer not in the manual?
Power| voltage range | 90-250V |
|---|---|
| frequency | 50-60Hz |
| power consumption | 12.5W |
Operating Environment| operating temperature range | 32°-104°F (0°-40°C) |
|---|---|
| relative humidity | 95% non-condensing |
Audio Inputs| input connectors | XLR/TRS balanced |
|---|---|
| input level range | +20 to +8dBu full scale |
| input impedance balanced | 50K |
| input impedance unbalanced | 25K |
| A/D conversion | 24-Bit Sigma Delta, 20Hz-20kHz ±1dB |
| crosstalk | -96dB @1kHz |
| A/D dynamic range | 105dB, typical |
Analog Audio Outputs| output connectors | XLR/TRS balanced |
|---|---|
| output level balanced | +26dBu |
| output level unbalanced | +20dBu |
| output impedance | <600Ω |
| D/A conversion | 24-Bit Delta Sigma, 20Hz-20kHz ±1dB |
| crosstalk | -96dB @1kHz |
| D/A dynamic range | 101dB, typical |
Digital Audio I/O| digital connectors | Coaxial RCA; S/PDIF (IEC-958, CP-340) |
|---|
System Sample Rates| sample rates | 44.1, 48kHz |
|---|
Display| display type | 150 x 32 LCD, Backlit |
|---|
Weight and Dimensions| width | 19" (483mm) |
|---|---|
| height | 1.75" (45mm) |
| depth | 4" (102mm) |
| weight | 3 lbs (1.4kg) |
Information on connecting audio sources and outputs.
How to set tempo-based program rates using the Tap function.
Parameter to adjust the output signal level.
Parameter to specify the type of audio input signal.
Parameter to define the function of the bypass control.
Parameter to control muting behavior during program changes.
Procedures for backing up user programs and settings via MIDI.
Procedure to restore all parameters to factory default settings.
To Next Page
