4-21
The Presets
0.5 ADTStereoIn ADJUST: LFO Rate 0–100
The left input is pitch shifted up, the right input is shifted down. An LFO modulates the pitch
from 2-12 cents. Stereo In/Stereo Out. ADJUST controls the LFO rate from 0-25Hz.
0.6 TripleTrack ADJUST: Separate 0–100
Adds two vocal tracks. ADJUST controls how closely the pitch shifted voices track the
pitch and timing of the input track.
0.7 Quad Track ADJUST: Separate 0–100
Similar to TripleTrack, this preset adds a third doubling to the original track. ADJUST
controls how tightly the three shifted voices track the original.
0.8 Quint Track ADJUST: Separate 0–100
Makes one voice sound like five by adding four double tracks to the original. Each one
is slightly out of time and out of tune with the others. ADJUST controls how tightly the
shifted voices track the original.
0.9 Add Voices ADJUST: How many? 1–4
A variation of QuintTrack with ADJUST adding more doublings to the original. 1=1 voice
with slight detune, 2=2 voices, 3=3 voices, 4=4 voices.
1.0 Major Thirds ADJUST: Inversion 0–4
This preset allows you to treat the input note as the root or third in major third harmony.
ADJUST lets you select the inversion. 0=slight detune, 1=sixth below, 2=third below,
3=third above, 4=sixth above.
1.1 Minor Thirds ADJUST: Inversion 0–4
This preset allows you to treat the input note as the root or third in minor third harmony.
ADJUST lets you select the inversion. 0=slight detune, 1=sixth below, 2=third below,
3=third above, 4=sixth above.
1.2 Major Triads ADJUST: Inversion 0–6
The input note can be harmonized as the root, third or fifth of a major chord. ADJUST
selects the harmony and inversion. 0=slight detune, 1=input is root (1st inversion),
2=input is root (2nd inversion), 3=input is third (1st inversion), 4=input is third (2nd
inversion), 5=input is fifth (1st inversion), 6=input is fifth (2nd inversion).
1.3 Minor Triads ADJUST: Inversion 0–6
The input note can be harmonized as the root, third or fifth of a minor chord. ADJUST
selects the harmony and inversion. 0=slight detune, 1=input is root (1st inversion),
2=input is root (2nd inversion),3=input is third (1st inversion), 4=input is third (2nd
inversion), 5=input is fifth (1st inversion), 6=input is fifth (2nd inversion).
1.4 Major & Dbls ADJUST: Inversion 0–4
The input note is doubled and also harmonized as the root of a major triad. ADJUST
selects the inversion of the chord.
1.5 Minor & Dbls ADJUST: Inversion 0–4
The input note is doubled and also harmonized as the root of a minor triad. ADJUST
selects the inversion of the chord.
1.6 4ths & Dbl ADJUST: Inversion 0–4
The input note is doubled and also harmonized as the root of chord made of four perfect
fourths. ADJUST selects the inversion of the chord.
Vocal Harmony
(P4 1.0 – P4 1.9)
Vocal Shift
(P4 0.0 – P4 0.9) cont'd.
To Next Page
Loading...
