98
Chapter 6: Replacing supplies
Replacing
service items
After printing approximately 100,000 pages, the message
80 Scheduled Maintenance
appears on the printer display.
This message indicates that it’s time for a service techni-
cian to replace the fuser, transport belt, and roller set. Rou-
tine replacement of these parts ensures peak printer
performance and helps prevent print quality problems
and paper feed problems resulting from worn parts.
Lexmark offers a maintenance kit that contains the parts
required for your printer. When the
80 Scheduled Mainte-
nance
message appears, contact your service provider or
the place where you bought your printer to order the
appropriate kit.
Warning!
A trained service
technician must install the items
in the maintenance kit.
You can continue to use your printer until you are able to
schedule a service call. Press
Go
to clear the
80 Scheduled
Maintenance
message. The
Maintenance
status message
appears on the display until you have the printer serviced.
Maintenance kit
Part number Printer power supply
11G0601 115V, 750W
11G0602 220V, 750W
To Next Page
Loading...
