46
Chapter 2: Changing printer settings
Parity Even
Odd
None*
Ignore
This setting lets you select the parity for serial input and output data frames. Refer to the
Technical Reference
for more information about parity.
Honor DSR Off*
On
The Honor DSR setting determines whether the printer uses its data set ready (DSR) signal.
DSR is one of the handshaking signals for most serial interface cables. The serial interface
uses DSR to distinguish data sent by the computer from data created by electrical noise in the
serial cable. This electrical noise can cause stray characters to print. Set Honor DSR On to
prevent stray characters from printing.
Serial Menu (continued)
Menu item Values
*Factory default
To Next Page
Loading...
