Lexmark 210 Printing Guide

• If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge of the
paper are on the right side of the tray.
One‑sided printing Two‑sided printing
ABC
Note: If the holes on the long edge of the paper are on the left side of the tray, then a jam may occur.
• Do not slide the paper into the tray. Load paper as shown in the illustration.
• If you are loading envelopes, then make sure that the flap side is facing up and the envelopes are on the left side of the
tray.
Printing Guide
Page 4 of 18

Lexmark 210 Specifications

General

Brand	Lexmark
Model	210
Category	Printer
Language	English