Duplexing of specially designed duplex labels is only supported in the S1855. You must also use a specially designed
wax fuser cleaner (P/N 99A1082) with this application. The cartridge containing this special wax fuser cleaner should
be ordered when cartridge replacements are needed.
Print cartridge with label fuser cleaner
Print cartridge part number
Yield
(average)
Coverage
(approximate)
1382929 Prebate
TM
(cartridge for special label machine use)
17,600 pages 5%
For more information, see the following:
• “Pick roller technology” on page 11
• “Maintenance procedures” on page 13
• “Troubleshooting” on page 13
Optra SC 1275
Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using
vinyl or polyester labels.
Limit card stock printing to occasional use of A4- or letter-size Index Bristol or Tag. The Optra SC supports stock up to
163 g/m
2
(43 lb).
Always feed card stock and labels from the multipurpose feeder. The multipurpose feeder can hold up to 75 sheets of
card stock or labels.
The following table lists the maximum weights supported by the multipurpose feeder.
Overview of card stock and label support
Paper source
Card stock Labels
Index Bristol Tag Cover Paper Vinyl
Multipurpose feeder
163 g/m
2
163 g/m
2
—
163 g/m
2
—
For paper and transparency specifications, see the printer User's Guide.
Printer specifications
144
To Next Page
Loading...
Need help?
General