Copy guide
Making a quick copy
1 Load an original document faceup, short-edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2 If you are loading a document into the ADF, adjust the paper guides.
3 From the control panel, press .
Note: If an LDSS profile has been installed, you may receive an error when attempting a quick copy. Contact your
system support person for access.
4 If you placed the document on the scanner glass, touch Finish the Job if you are done.
Copying using the ADF
1 Load an original document faceup, short-edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2 If you are loading a document into the ADF, adjust the paper guides.
3 On the home screen, touch Copy, or use the keypad to enter the number of copies.
The copy screen appears.
4 Change the copy settings as needed.
5 Touch Copy It.
Copying using the scanner glass (flatbed)
1 Place an original document facedown on the scanner glass in the upper left corner.
2 On the home screen, touch Copy, or use the keypad to enter the number of copies.
The copy screen appears.
3 Change the copy settings as needed.
4 Touch Copy It.
5 Place the next document on the scanner glass, and then touch Scan Next if you have more pages to scan, or
touch Finish the Job if you are done.
Touching Finish the Job returns the printer to the copy screen.
Job interrupt
Job interrupt pauses the current print job and lets you print copies.
Copy guide
Page 1 of 4
To Next Page
General
