Lexmark 940e - User Manual

Other manuals for Lexmark 940e

Maintenance Guide25 pages

Service Manual815 pages

Questions and Answers:

M
Mary GordonAug 16, 2025
What to do if my Lexmark All in One Printer jobs do not print?
- A
  Ashley JonesAug 16, 2025
  To resolve print job issues with your Lexmark All in One Printer, ensure 'Ready' or 'Power Saver' is displayed before printing. Also, remove paper from the standard exit bin, load paper into the tray, and verify you're using the correct printer software. Confirm that the internal print server is properly installed and the printer is connected to the network. Finally, check the cable connections to the printer and print server to ensure they are secure.
M
Michael StephensAug 22, 2025
How to fix an unresponsive Lexmark All in One Printer?
- C
  Chelsea RichardsAug 22, 2025
  If your Lexmark All in One Printer is unresponsive, try turning it off and then back on. This often resolves the issue.
D
Derrick JimenezAug 26, 2025
Why does my Lexmark All in One Printer take so long to print?
- A
  anna91Aug 26, 2025
  To speed up print times on your Lexmark All in One Printer, reduce the number and size of fonts, the complexity and number of images, and the number of pages in the job. Alternatively, you can try turning the page protect setting off.
S
Steven PierceAug 28, 2025
Why is my Lexmark All in One Printer printing incorrect characters?
- A
  Annette WestAug 28, 2025
  If your Lexmark All in One Printer is printing incorrect characters and 'Ready Hex' appears on the display, the printer is in Hex Trace mode. Turn the printer off and back on to exit this mode and print your job correctly.
M
Michael WardAug 31, 2025
Why is my Lexmark 940e All in One Printer printing from the wrong tray?
- C
  Chris RiveraAug 31, 2025
  If your Lexmark All in One Printer prints from the wrong tray or on the wrong paper, ensure the 'Paper Type' setting matches the paper loaded in the tray.
M
Mr. Jeffrey Douglas Jr.Sep 3, 2025
How to fix large jobs not collating on Lexmark 940e?
- K
  kingtylerSep 3, 2025
  To ensure large jobs collate properly on your Lexmark All in One Printer: 1. Set 'Collate' to 'On' from the Finishing menu or Print Properties. 2. Reduce the complexity of the print job by minimizing the number and size of fonts, the number and complexity of images, and the number of pages. 3. Consider adding printer memory or an optional hard disk.
S
Steven DiazSep 6, 2025
Why is tray linking not working on my Lexmark All in One Printer?
- J
  Joshua ScottSep 6, 2025
  To resolve tray linking issues on your Lexmark All in One Printer, load the same size and type of paper in each tray. Additionally, print a menu settings page and compare the settings for each tray.
A
Austin BurtonSep 9, 2025
What to do if Lexmark All in One Printer has unexpected page breaks?
- E
  emccormickSep 9, 2025
  If you are experiencing unexpected page breaks with your Lexmark All in One Printer, increase the Print Timeout value.
B
Brian MayoSep 10, 2025
What to do if confidential jobs do not print on Lexmark 940e?
- F
  fredmaddoxSep 12, 2025
  If confidential or held jobs are not printing on your Lexmark All in One Printer, delete the job and try printing it again, as only part of the job may print. Also, free up printer memory by deleting held or invalid jobs.
K
Kevin VargasSep 12, 2025
What to do if Door A will not shut properly on Lexmark 940e All in One Printer?
- S
  Samuel GallowaySep 12, 2025
  If Door A on your Lexmark All in One Printer will not shut properly, make sure the green paper jam clearance lever behind Door A is in place.