5
Using printer menus
Menu index
A number of menus are available to make it easy for you to change printer settings. The diagram shows the menu index on
the operator panel, the menus, and items available under each menu. The items in each menu and the values you can
select are described in more detail later in this chapter.
Back Press the Back button to return to the last screen viewed.
Note: Changes made on a screen will not be applied if you press the Back button.
Navigation buttons The Left and Right buttons are used to move within a screen, such as
moving from one menu index item to another.
The Select button is used to initiate an action on a selection. Press Select to
select a menu item, or to submit a configuration item.
Display panel The display panel shows messages describing the current state of the printer and
indicating possible printer problems you must resolve.
The top line of the display is the header line.
Error light The error light appears whenever a service message occurs. For more information, see
Service Messages.
Button Function
ERROR
Tray1:Letter
Ready
ERROR
Tray1:Letter
Set K Toner CG
Config Menu
Timeout
SleepMode
SleepTime
Port
Priority
Display
PaperDisp
Auto Feed
Calibration
Utility Menu
Clear Belt CG
Clear Fuser
Clear Print Info
Setting default
Tra y 2 M a r g i n
Network Menu
Ip Addr
Subnet. Mask
Gateway Addr
IP Setting
Network Speed
Toner Sense
Menu
Execute Sensing
Clear Sense Data
Test Menu
Te s t Pr int
ConfigPage
NetConfigPage
StatusPage
TestMode
User Settings Administrative Settings
To Next Page
Loading...
