Lexmark C500n - Toner Sense Menu

10
Using printer menus
Toner Sense Menu
The Toner Sense Menu is used for manually resetting the toner count.
IP Setting Determines whether the ENA
information is manually or
automatically entered.
AUTO*
MANUAL
Once the action is performed, press
to return to Ready.
Network Speed Specifies the network speed. AUTO*
10Mbits/s
100Mbits/s
1 Press to choose the value, and
then press to save.
2 Once the action is performed,
press to return to Ready.
Menu selection Purpose Values
Execute Sensing Manually resets the toner count.
Note: The printer will auto-
sense when a new cartridge is
installed. This should only be
used in the event that the printer
does not recognize a cartridge
as new.
1 Press to choose the menu item, and then press .
2 Once the action is performed, press to return to Ready.
Clear Sense Data
Menu selection Purpose Values