Lexmark C500n - Test Menu

7
Using printer menus
Test Menu
Printable pages that display current settings information for the printer.
Display Determines the language of the text
displayed on the operator panel.
JAPANESE
ENGLISH*
GERMAN
FRENCH
SPANISH
ITALIAN
PaperDisp Specifies the paper size to be
displayed on the control panel when
the selected tray detects small size
paper.
DL*
A5
HLT
A6
#10
Auto Feed Specifies which tray to print from
when the paper tray selection in the
printer driver is set to automatic.
ALL* Automatic priority. The printer
selects the tray that is installed with
the nearest size.
1 Specifies tray 1.
2 Specifies tray 2.
Calibration Specifies whether or not the printer
uses toner calibration.
ON* Turns calibration on.
OFF Turns calibration off.
Menu selection Purpose Values
TestPrint Prints a color test page. After selecting this item, the page will print. Once the page is
printed, press to return to Ready.
Note: The input tray displayed in the upper line of the
operator panel is the default source for this test. If the media
type selected is transparency, then tray 1 will be used (Media
type is determined in the Test Mode menu). The
configuration page only prints on A4- or letter-size. If neither
size is available, printing will stop until the correct size is
loaded.
ConfigPage Prints the printer configuration
page.
NetConfigPage Prints information relating to
network settings and verifies the
network connection.
This page also provides information
that helps you configure for network
printing.
StatusPage Prints the status page for detailed
parts life information.
Menu selection Purpose Values