Using the output bin
30
Media specifications
Using the output bin
The output bin holds up to 250 sheets of 20 lb paper and is located on top of the printer. The output bin collates print jobs
facedown.
The output bin supports all media listed in Media sizes and support.
Loading the trays
Your printer has three trays to select from: the standard tray (tray 1), also known as the 250-sheet tray or 250-sheet letter-
size tray, the optional 250-sheet legal-size tray (tray 1), or an optional 530-sheet tray (tray 2), which is part of the 530-sheet
drawer and fits into the support unit. Load the paper or specialty media you use for the majority of your print jobs in tray 1.
Proper media loading helps prevent jams and helps make your printing trouble-free.
Note: You use either the standard tray or the optional 250-sheet legal size tray in the printer. Only one tray
may be used at a time. Either tray is considered tray 1.
Do not remove trays while a job prints or while Please Wait blinks on the operator panel. Doing so may cause a jam.
Media capacities
Legend
✓ — supported
✘— unsupported
Media type
Standard tray
250-sheet letter size tray
(Tray 1)
Optional tray
250-sheet legal size tray
(Tray 1)
Optional
530-sheet drawer
(Tray 2)
Paper 250 sheets* 250 sheets* 530 sheets*
Card stock 30 sheets** 30 sheets** ✘
Labels 80 80 ✘
Transparencies 50 50 ✘
Envelopes 10 of Com 10 10 of Com 10 ✘
* Based on 20 lb paper.
** 30 sheets of 90 lb card stock or 25 sheets of 110 lb card stock.
To Next Page
Loading...
