Loading envelopes in the standard tray
35
Media specifications
3 Squeeze the width guide tabs as shown in step 3 on page 32. Slide the width guide to the correct position for the
size of envelope you are loading. Notice the size indicators on the bottom left of the tray.
4 Push the envelope stack aid tabs toward each other. They snap into place.
Note: These tabs keep a stack of envelopes in the proper position for feeding.
5 Flex a stack of envelopes back and forth and then straighten the edges on a level surface. Press down the corners
to flatten them.
Fan the envelopes. This prevents the edges of the envelopes from sticking together and helps them feed properly.
DL
#
1
0
LT
R
A
4
B5
B
5
DL
#
1
0
LT
R
A
4
B5
B
5
PAPER
LABEL ENVELOPE
TRANSPARENCY CARDSTOCK
Size indicators
To Next Page
Loading...
