Connecting using a USB cable
USB setup and connection
1 Insert the Software and Documentation CD.
2 Click Install.
3 Click Agree.
4 Click Suggested.
5 Click Local Attach.
6 Connect the installation cable to a USB port on the computer and the USB port on the back of the printer.
7 Connect the power cable to the printer and then to a properly grounded electrical outlet, and then turn the printer
on.
8 Follow the on-screen instructions to complete the USB configuration.
Note: For information on telephone and fax setup, see the User's Guide on the Software and Documentation CD.
Connecting using a USB cable
32
To Next Page
Loading...
