3
2
1
4 Flex the sheets back and forth to loosen them. Do not fold or
crease the paper. Straighten the edges on a level surface.
5 Load the paper stack with the recommended print side faceup.
Notes:
• Place print side facedown for duplex printing.
• Place pre-punched paper with the holes toward the front of
the tray.
• Place letterheads faceup with the header on the left side of
the tray.
• Place letterheads facedown with the header on the right side
of the tray for duplex printing.
• Make sure the paper is below the maximum fill line located
on the edge of the paper tray. Overloading the tray can cause
paper jams and possible printer damage.
6 Insert the tray.
7 From the printer control panel, verify the Paper Size and Paper
Type for the tray based on the paper you loaded.
Loading the 2000-sheet
high-capacity feeder
The high-capacity feeder can hold up to 2,000 sheets of letter-, A4-,
and legal-size paper (80 g/m
2
or 20 lb).
1 Pull the tray out.
2 Adjust the width guide as necessary.
1
2
2
To Next Page
Loading...
