455 staple jam
1 Press the latch to open the stapler door.
Note: The stapler door is located behind the finisher.
2 Lower the latch of the staple cartridge holder, and then pull the
staple cartridge holder out of the printer.
1
2
3 Use the metal tab to lift the staple guard, and then remove any
jammed or loose staples.
4 Close the staple guard.
5 Press down on the staple guard until it clicks into place.
6 Push the staple cartridge holder firmly back into the stapler unit
until the staple cartridge holder clicks into place.
7 Close the stapler door.
8 From the printer control panel, touch Continue, jam cleared.
9
To Next Page
Loading...
