2 Grasp the jammed paper on each side, and then gently pull it out.
3 Close the side door.
4 From the printer control panel, touch Continue, jam cleared.
Paper jam in the optional trays
1 Open the side door of the specified optional tray.
2 Grasp the jammed paper on each side, and then gently pull it out.
3 Close the side door.
4 From the printer control panel, touch Continue, jam cleared.
250 paper jam
1 Push the paper pick tab, and then remove all paper from the
multipurpose feeder.
1
2
Warning—Potential Damage: Pulling the paper out, without
pushing the paper pick tab first, may cause the paper pick tab to
break.
2 Grasp the jammed paper on each side, and then gently pull it out.
1
2
Note: Make sure all paper fragments are removed.
3 Reload paper into the multipurpose feeder, and then adjust the
paper guides.
4 From the printer control panel, touch Continue, jam cleared.
400–403 and 460–461 paper jams
1 Open the paper transport unit door.
2 Firmly grasp the jammed paper, and then gently pull it out.
Note: Make sure all paper fragments are removed.
3 Close the paper transport unit door.
4 From the printer control panel, touch Continue, jam cleared.
431–454, and 456–458 paper jams
1 Push the button, and then slide the output finisher or mailbox to
the right.
1
2
2 Open the finisher or mailbox access door.
3 Grasp the jammed paper, and then gently pull it out.
Note: Make sure all paper fragments are removed.
4 Close the finisher or mailbox access door.
5 Slide the finisher or mailbox to the left until it clicks in place.
6 From the printer control panel, touch Continue, jam cleared.
8
To Next Page
Loading...
Need help?
General
