Using the Embedded Web Server
• Click Restore Defaults to return all fields to factory default settings.
• Click Reset to cancel changes to all fields and begin again.
• Click Apply to save changes to the profile.
Note: Reset and Apply are the only options available on certain devices.
Using MarkVision Professional
• Click OK to save changes.
• Click Cancel to exit without making changes.
Scheduling energy-saving tasks
Note: This option is available only in printers that support the Embedded Solutions Framework (eSF) 3.0.
1 Access the application configuration settings from the Embedded Web Server.
2 From the Scheduled Power Modes section, click Add.
The Add Schedule Power Modes page appears.
3 In the Event Name field, type a descriptive name for the task.
4 From the Power Mode list, select an energy-saving task.
5 From the Time field, select the hour of day for the printer to perform the energy-saving task.
6 From the Day(s) field, select the day of the week or the span of days for the printer to perform the energy-saving
task.
7 Do one of the following:
Using the Embedded Web Server
• Click Restore Defaults to return all fields to factory default settings.
• Click Reset to cancel changes to all fields and begin again.
• Click Apply to save changes to the profile.
Note: Reset and Apply are the only options available on certain devices.
Using MarkVision Professional
• Click OK to save changes.
• Click Cancel to exit without making changes.
Configuring Eco-Settings using the printer control panel
Note: Make sure the Lock UI option is not selected in the application configuration settings for you to configure
Eco-Settings from the printer control panel.
1 From the home screen, touch the application icon.
2 Adjust the settings as necessary.
3 After all Eco-Settings are configured, touch Submit or OK.
Configuring the application
12
To Next Page
Loading...
