Lexmark Color Laser - Administering the Device; Using the Embedded Web Server (EWS)

Exporting and importing a configuration using MarkVision Professional
Exporting configuration settings
1 From the MarkVision Professional Home screen, select Embedded Solutions - Solutions Management from the All
Tasks list.
2 Using the Quick Find or Folders tabs, select the device(s) where the application is installed.
Use Ctrl + click and Shift + click to select multiple devices.
Note: Password-protected network devices are displayed in red. Enter the device password to gain access to the
device.
3 From the list, select the name of the application you want to configure, and then click Export.
4 Browse to find a location to save the universal configuration file (.ucf), and then click Save.
Importing configuration settings
1 From the MarkVision Professional Home screen, select Embedded Solutions - Solutions Management from the All
Tasks list.
2 Using the Quick Find or Folders tabs, select the device(s) where the application is installed.
Use Ctrl + click and Shift + click to select multiple devices.
Note: Password-protected network devices are displayed in red. Enter the device password to gain access to the
device.
3 From the list, select the name of the application you want to configure, and then click Import.
4 Browse to find the universal configuration file (.ucf), and then click Add.
Configuring the application
15