EasyManuals Logo

Lexmark CS510 Printing Guide

Lexmark CS510
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Printing guide
Get the most from the printer by properly loading the trays and properly setting the types and sizes of media.
Loading the 250 and 550sheet tray
The printer has one 250-sheet tray (Tray 1) with an integrated manual feeder. The 250-sheet tray, the 650-sheet duo tray, and
the 550-sheet tray support the same paper sizes and types and are loaded in the same way.
CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray separately. Keep all trays
closed until needed.
1 Pull out the tray completely.
Note: Do not remove trays while a job is printing or while Busy appears on the display. Doing so may cause a jam.
2 If the paper is longer than lettersize paper, then push the length guide tab at the back of the tray to extend it.
2
1
Printing guide
Page 1 of 3

Other manuals for Lexmark CS510

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexmark CS510 and is the answer not in the manual?

Lexmark CS510 Specifications

General IconGeneral
Print TechnologyColor Laser
Print Speed (Black)32 ppm
Print Speed (Color)32 ppm
Print Resolution1200 x 1200 dpi
Monthly Duty Cycleup to 75, 000 pages
Standard Memory512 MB
Maximum Memory2560 MB
Processor Speed800 MHz
Paper Input Capacity250 sheets
Paper Input Capacity (Maximum)1450 sheets
Paper Output Capacity150 sheets
Operating System CompatibilityWindows, Mac OS, Linux
ConnectivityUSB, Ethernet
Media Types SupportedPlain Paper, Card Stock, Labels, Envelopes
Media SizesA4, A5, A6, Executive, Legal, Letter
Mobile PrintingLexmark Mobile Print
Toner CartridgesCyan, Magenta, Yellow, Black

Related product manuals