3 Flex, fan, and align the paper edges before loading.
4 Load the paper stack with the printable side faceup.
• For one‑sided printing, load letterhead faceup with the header toward the front of the tray.
• For two‑sided printing, load letterhead facedown with the header toward the back of the tray.
• Do not slide paper into the tray.
• For plain paper, make sure that the stack height is below the maximum paper fill indicator. Overfilling
may cause paper jams.
Set up, install, and configure 32
To Next Page
Loading...
Need help?
General
