Loading paper and specialty media
Setting the size and type of the specialty media
The trays automatically detect the size of plain paper. For specialty media like labels, card stock, or envelopes,
do the following:
1 From the home screen, touch Settings > Paper > Tray Configuration > Paper Size/Type > select a paper
source.
2 Set the size and type of the specialty media.
Configuring
Universal paper settings
1 From the home screen, touch Settings > Paper > Media Configuration > Universal Setup.
2 Configure the settings.
Enabling the Multiple Universal Sizes setting
1 From the home screen, touch Settings > Device > Maintenance > Configuration Menu > Tray
Configuration.
2 Enable the Multiple Universal Sizes setting.
Loading trays
CAUTION—TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately.
Keep all other trays closed until needed.
1 Remove the tray.
Note: To avoid jams, do not remove trays while the printer is busy.
Set up, install, and configure 30
To Next Page
Loading...
