Lexmark CS737 - Page 87

Menu item Description
Supply Usage And Counters
Reset Color Imaging Kit Counter
Reset the counter after installing a new color imaging kit.
Supply Usage And Counters
Reset Maintenance Counter
Reset the counter after installing a new fuser.
Supply Usage And Counters
Tiered Coverage Ranges
Adjust the amount of color coverage for each printing range.
Printer Emulations
PPDS Emulation
O*
On
Set the printer to recognize and use the PPDS data stream.
Printer Emulations
PS Emulation
O
On*
Set the printer to recognize and use the PS data stream.
Printer Emulations
Enable Formsmerge
O*
On
Activate Formsmerge to store the forms into the hard disk or
Intelligent Storage Drive (ISD).
Note: A hard disk or an ISD must be installed.
Printer Emulations
Enable Prescribe
O*
On
Enable Prescribe emulation.
Printer Emulations
Emulator Security
Page Timeout (60 minutes*)
Reset Emulator After Job (O*)
Disable Printer Message Access (On*)
Configure the security settings of the printer during emulation
mode.
Print Configuration
Black Only Mode
O*
On
Set the printer to print always color content in grayscale .
Print Configuration
Color Trapping
O
1
2*
3
4
5
Enhance the printed output to compensate for misregistration
in the printer.
Note: An asterisk (*) next to a value indicates the factory default setting.
Use printer menus 87