R
Raymond LewisSep 5, 2025
What to do if my Lexmark Printer shows 'Incompatible tray [x]'?
- AAndrew CarrSep 5, 2025
If your Lexmark printer displays 'Incompatible tray [x]', remove and then reinstall the indicated tray to clear the message.
What to do if my Lexmark Printer shows 'Incompatible tray [x]'?
If your Lexmark printer displays 'Incompatible tray [x]', remove and then reinstall the indicated tray to clear the message.
What to do if my Lexmark Printer says 'Waste toner bottle nearly full'?
If your Lexmark printer displays a message indicating that the 'Waste toner bottle nearly full', you may need to order a waste toner bottle. If necessary, select Continue on the printer control panel to clear the message and continue printing.
What to do if my Lexmark Printer says '[Type] imaging kit low'?
If your Lexmark printer displays a message indicating that the '[Type] imaging kit low', you may need to order an imaging kit. If necessary, select Continue on the printer control panel to clear the message and continue printing.
What to do if my Lexmark Printer says 'Standard USB port disabled'?
If your Lexmark printer displays 'Standard USB port disabled', from the printer control panel, select Continue to clear the message. For non-touch-screen printer models.
How to clear 'Remove packaging material, [area name]' message on Lexmark Printer?
To clear the 'Remove packaging material, [area name]' message on your Lexmark printer, remove any remaining packing material from the indicated location. Then, from the printer control panel, touch Continue to clear the message. For non-touch-screen printer models.
What to do if Lexmark Printer says 'Replace all originals if restarting job'?
If your Lexmark printer displays 'Replace all originals if restarting job', from the printer control panel, try one or more of the following: Select Scan from automatic feeder, and then press to continue scanning from the ADF immediately after the last successful scan job. Select Scan from flatbed, and then press to continue scanning from the scanner glass immediately after the last successful scan job. Select Finish job without further scanning, and then press to end the last successful scan job. Select Restart Job, and then press to restart the scan job with the same settings from the previous scan job. Select Cancel Job, and then press to clear the message and cancel the scan job.
How to resolve 'Load Manual Feeder with [custom type name]' on Lexmark Printer?
If your Lexmark printer displays 'Load Manual Feeder with [custom type name]', load the feeder with the correct size and type of paper. Depending on your printer model, touch Prompt each page, paper loaded or press on the printer control panel to clear the message and continue printing. If those steps don't work, cancel the current job.
How to resolve 'Load Manual Feeder with [custom string]' on Lexmark Printer?
If your Lexmark printer displays 'Load Manual Feeder with [custom string]', load the feeder with the correct size and type of paper. Depending on your printer model, touch Prompt each page, paper loaded or press on the printer control panel to clear the message and continue printing. If the issue persists, cancel the current job.
What to do if my Lexmark Printer says 'Remove paper from standard output bin'?
If your Lexmark printer displays the message 'Remove paper from standard output bin', remove the paper stack from the standard bin.
How to fix 'Incorrect paper size' error on Lexmark Printer?
To address the 'Incorrect paper size' error on your Lexmark printer, load the correct size of paper in the paper source. Alternatively, from the printer control panel, select Continue to clear the message and print using a different paper source. For non-touch-screen printer models, press to confirm. Also, check the length and width guides of the paper source to ensure the paper is loaded properly. Finally, make sure the correct paper size and type are specified in the Printing Preferences or in the Print dialog, as well as in the Paper menu on the printer control panel.
Print Technology | Color Laser |
---|---|
Scan Technology | CIS |
ADF Capacity | 50 sheets |
Duplex Printing | Yes |
Standard Connectivity | USB 2.0, Ethernet |
Memory | 512 MB |
Display | 2.4-inch color LCD |
Maximum Paper Size | 8.5 x 14 inches |
Scanner Type | Flatbed, ADF |
Processor Speed | 800 MHz |
Functions | Print, Copy, Scan |
Copy Resolution | 600 x 600 dpi |
Network Connectivity | Ethernet |
Operating Systems Supported | Windows, Mac OS, Linux |
Standard Paper Input | 250 sheets |
Paper Capacity | 250 sheets |
Fax | No |