Use To
ADF Loaded Beep
Enabled
Disabled
Specify a custom beep when paper is loaded in the ADF.
Note: Enabled is the factory default setting.
Quiet Mode
Off
On
Reduce the amount of noise produced by the printer.
Notes:
• Off is the factory default setting. This supports the
performance specifications for your printer.
• On configures the printer to produce as little noise as
possible. This is best suited for printing text and line art.
• For optimal printing of color‑rich documents, set Quiet Mode
to Off.
• Selecting Photo from the printer driver may disable Quiet
Mode and provide better print quality and full speed
printing.
Run Initial setup
Yes
No
Run the setup wizard.
Notes:
• Yes is the factory default setting.
• After completing the setup wizard by selecting Done at the
“Country select” screen, the default becomes No.
Understanding printer menus 146
To Next Page
Loading...
