Lexmark CX921 User Manual

Setting up and using the accessibility features
Enabling Magnification mode
1 From the control panel, press and hold the 5 key until you hear a voice message.
2 Select
Magnification
mode.
3 Select OK.
For more information on navigating a magnified screen, see
“Navigating the screen using gestures” on
page 25.
Activating Voice Guidance
From the control panel
1 Press and hold the 5 key until you hear a voice message.
2 Select OK.
From the keyboard
1 Press and hold the 5 key until you hear a voice message.
2 Press Tab to navigate the focus cursor to the OK button, and then press Enter.
Notes:
• Voice Guidance is also activated when you insert headphones into the headphone jack.
• To adjust the volume, use the volume buttons at the bottom part of the control panel.
Adjusting the Voice Guidance speech rate
1 From the home screen, select Settings > Device > Accessibility > Speech Rate.
2 Select the speech rate.
Adjusting the default internal speaker volume
1 From the control panel, navigate to:
Settings > Device > Preferences > Audio Feedback
2 Adjust the volume.
Notes:
• If Quiet Mode is enabled, then audible alerts are turned o. This setting also slows the printer
performance.
Setting up and using the accessibility features 24

Lexmark CX921 Specifications

General

Maximum Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Scan Technology	CIS
ADF Capacity	100 sheets
Standard Output Capacity	500 sheets
Standard Memory	4096 MB
Hard Drive	500 GB
Functions	Print, Copy, Scan, Fax
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Operating System Compatibility	Windows, Mac, Linux
Display	Touchscreen
Display Size	10 inch
Scan Type	Flatbed, ADF
Network Connectivity	Ethernet, USB
Mobile Printing	Mopria
Fax Resolution	300 x 300 dpi