Lexmark CX921 User Manual

3 Tou ch .
4 Create a shortcut.
Changing the fax resolution
1 Load an original document into the ADF tray or on the scanner glass.
2 From the home screen, touch Fax, and then enter the needed information.
3 Tou ch Resolution, and then adjust the setting.
4 Send the fax.
Adjusting the fax darkness
1 Load an original document into the ADF tray or on the scanner glass.
2 From the home screen, touch Fax, and then enter the needed information.
3 Tou ch Darkness, and then adjust the setting.
4 Send the fax.
Printing a fax log
1 From the home screen, touch Settings > Reports > Fax.
2 To uch Fax Job Log or Fax Call Log.
Blocking junk faxes
1 From the home screen, touch Settings > Fax > Fax Setup > Fax Receive Settings > Admin Controls.
2 Set Block No Name Fax to On.
Holding faxes
1 From the home screen, touch Settings > Fax > Fax Setup > Fax Receive Settings > Holding Faxes.
2 Select a mode.
Forwarding a fax
1 From the home screen, touch Settings > Fax > Fax Setup > Fax Receive Settings > Admin Controls.
2 To uch Fax Forwarding > Forward.
3 Configure the Forward to and Confirmation E‑mail settings.
Faxing 71

Lexmark CX921 Specifications

General

Maximum Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Scan Technology	CIS
ADF Capacity	100 sheets
Standard Output Capacity	500 sheets
Standard Memory	4096 MB
Hard Drive	500 GB
Functions	Print, Copy, Scan, Fax
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Operating System Compatibility	Windows, Mac, Linux
Display	Touchscreen
Display Size	10 inch
Scan Type	Flatbed, ADF
Network Connectivity	Ethernet, USB
Mobile Printing	Mopria
Fax Resolution	300 x 300 dpi