Lexmark CX921 User Manual

Scanning
Using the automatic document feeder and scanner glass
Automatic document feeder (ADF) Scanner glass
• Use the ADF for multiple‑page or two-sided
documents.
• Load an original document faceup. For multiple‑page
documents, make sure to align the leading edge
before loading.
• Make sure to adjust the ADF guides to match the width
of the paper that you are loading.
• Use the scanner glass for single‑page documents,
book pages, small items (such as postcards or
photos), transparencies, photo paper, or thin media
(such as magazine clippings).
• Place the document facedown in the corner with the
arrow.
Scanning to an FTP server
1 Load the original document into the ADF tray or on the scanner glass.
2 From the home screen, touch FTP, and then enter the needed information.
3 If necessary, configure other FTP settings.
4 Send the FTP job.
Creating an FTP shortcut
1 From the home screen, touch FTP.
2 Enter the FTP server address, and then touch .
3 Create a shortcut.
Creating a network folder shortcut
1 Open a web browser, and then type the printer IP address in the address field.
Scanning 72

Lexmark CX921 Specifications

General

Maximum Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Scan Technology	CIS
ADF Capacity	100 sheets
Standard Output Capacity	500 sheets
Standard Memory	4096 MB
Hard Drive	500 GB
Functions	Print, Copy, Scan, Fax
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Operating System Compatibility	Windows, Mac, Linux
Display	Touchscreen
Display Size	10 inch
Scan Type	Flatbed, ADF
Network Connectivity	Ethernet, USB
Mobile Printing	Mopria
Fax Resolution	300 x 300 dpi