EasyManuals Logo

Lexmark CX921 User Manual

Lexmark CX921
334 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #277 background imageLoading...
Page #277 background image
7 Unpack the optional card.
Warning—Potential Damage: Avoid touching the connection points along the edge of the card.
8 Push the card firmly into place.
Note: The entire length of the connector on the card must touch and be flush against the controller
board.
Warning—Potential Damage: Improper installation of the card may cause damage to the card and the
controller board.
9 Attach the shield, and then attach the access cover.
10 Attach the connector cover.
11 If you removed a filter cover, then attach the cover.
12 Connect the power cord to the electrical outlet, and then turn on the printer.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
Upgrading and migrating 277

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexmark CX921 and is the answer not in the manual?

Lexmark CX921 Specifications

General IconGeneral
Maximum Print Resolution1200 x 1200 dpi
Duplex PrintingYes
Scan TechnologyCIS
ADF Capacity100 sheets
Standard Output Capacity500 sheets
Standard Memory4096 MB
Hard Drive500 GB
FunctionsPrint, Copy, Scan, Fax
Copy Resolution600 x 600 dpi
Scan Resolution600 x 600 dpi
Operating System CompatibilityWindows, Mac, Linux
DisplayTouchscreen
Display Size10 inch
Scan TypeFlatbed, ADF
Network ConnectivityEthernet, USB
Mobile PrintingMopria
Fax Resolution300 x 300 dpi

Related product manuals