– Away from the direct airflow of air conditioners, heaters, or ventilators
– Free from direct sunlight and humidity extremes
• Observe the recommended temperatures and avoid fluctuations.
Ambient temperature 10 to 30°C (50 to 86°F)
Storage temperature -10 to 40°C (14 to 104°F)
• Allow the following recommended amount of space around the printer for proper ventilation:
1 Top 400 mm ( 15.7 0 in.)
2 Rear 120 mm (4.80 in.)
3 Right side 400 mm (15.70 in.)
4 Front 444.5 mm (17.50 in.)
5 Left side 120 mm (4.80 in.)
Printer configurations
Note: Make sure to configure the printer on a flat, sturdy, and stable surface.
Learning about the printer 12
To Next Page
Loading...
Need help?
General
