Loading the 2500‑sheet tray
The 2500‑sheet tray supports only one paper size, either A4 or letter. To check the supported paper size,
pull out the tray and then locate the size indicator on the bottom of the tray.
CAUTION—TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately.
Keep all other trays closed until needed.
1 Pull out the tray.
Notes:
• To avoid paper jams, do not remove trays while the printer is busy.
• To avoid errors, make sure that the transfer guide is always at the left side of the tray.
2 Flex, fan, and align the paper edges before loading.
Loading paper and specialty media 30
To Next Page
Loading...
Need help?
General
