Installing the staple finisher
CAUTION—TIPPING HAZARD: Installing one or more options on your printer or MFP may require a
caster base, furniture, or other feature to prevent instability causing possible injury. For more information
on supported configurations, see
www.lexmark.com/multifunctionprinters.
1 Turn o the printer.
2 Unplug the power cord from the electrical outlet, and then from the printer.
3 Unpack the staple finisher.
Note: Remove the tag but keep the screw for use in
step 11.
4 Remove the standard bin.
Upgrading and migrating 299
To Next Page
Loading...
Need help?
General
