Paper size Dimensions ADF Scanner
Other Envelope 98 x 162 mm to
176 x 250 mm
(3.9 x 6.3 in. to 6.9 x 9.8 in.)
XX
SRA3 320 x 450 mm
(12.6 x 17.7 in.)
XX
Statement 140 x 216 mm
(5.5 x 8.5 in.)
Universal 89 x 98.4 mm to
297 x 431.8 mm
(3.50 x 3.87 in. to
11.69 x 17.00 in.)
2 2
1
This paper is loaded only in short‑edge orientation.
2
The paper source supports paper size without size sensing.
Paper sizes supported by the finisher
Note: When a finisher is installed, the standard finisher bin becomes the default bin even for print jobs that
do not require finishing.
Supported paper sizes
Paper size Staple finisher Staple, hole punch
finisher bin 1
Staple, hole punch
finisher bin 2
Booklet finisher
11 x 17
12 x 18
1 1 5
A3
X
1 5
A4
A5
1 1 4
X
A6
1 1
XX
Executive
X
Folio
1
X
JIS B5
X
1
Paper is supported but the finisher does not stack, staple, or punch holes in it.
2
Paper is supported only if the finisher stacks and punches holes in it but does not staple it.
3
Paper is supported only if the paper size is 210 x 279.4 mm to 320 x 457.2 mm (8.27 x 11 in. to 12.6 x 18 in.).
4
Paper is supported only if the finisher stacks and staples the paper but does not punch holes in it.
5
Paper is supported only if the finisher stacks the paper but does not staple or punch holes in it.
6
Paper is supported only for two‑hole punch.
Loading paper and specialty media 40
To Next Page
Loading...
Need help?
General
