Loading the 250-sheet tray
12
Extending the tray for legal- or folio-size paper
To load legal- or folio-size paper, extend the tray. You may also attach a dust cover (if available on
your printer model) on the back of the printer to protect the tray while it is extended.
1 Press down on the latch at the back of the tray, and expand the tray until the extender locks
into place.
Attaching the dust cover
The dust cover helps protect the tray from the environment. It also keeps the tray from being knocked
out of position while it is extended.
Attach the dust cover to the back of the printer by aligning the tabs on the cover to the holes on the
printer, then snap the cover into place.
Note: This feature may not be available for some models.
6
5
To Next Page
Loading...
