Clearing jams
18
7 Lift the green flap at the front of the printer, and remove the jammed pages from behind the
flap.
8 Open the rear exit door, and remove the jammed pages.
9 After you have cleared the jammed pages, reinstall the print cartridge assembly, and securely
close all the printer doors.
10 Press Continue to resume printing.
Note: Jam recovery is set to Auto by default. When jam recovery is set to Auto, the
memory that holds the image of a page may be reused after the page is printed but
before it has successfully exited the printer if that memory is needed for another
use. Therefore, a jammed page may or may not be reprinted, depending on the
overall memory usage of the printer.
CAUTION:The fuser or fuser area may be hot.