2-
If the media is jammed tightly behind the roller, or if you just can’t
get a grip on it.
2-
If the media is jammed tightly behind the roller, or if you just can’t
get a grip on it.
A- Open the front output door by pulling on the center tab
B- Pull out the paper.
Compiled by: Brent Runnells, EPSCoR-ITER \\ . . .\sdal\How-To\ht_lexmark_e320.doc
Last modified 7/13/04
11
\\ . . .\sdal\How-To\ht_lexmark_e320.doc
Last modified 7/13/04
11
To Previous Page
Loading...
Need help?
General
