Recognizing installed options
34
Installing options
Recognizing installed options
The printer driver should automatically recognize the newly-installed option when the printer is turned on. If it does not, you
can add the appropriate option manually.
Note: If you have not installed your printer driver yet, follow the appropriate instructions on the Setup sheet
supplied with your printer. After you have installed a printer driver, return here to complete these
instructions.
1 Click Start à Settings à Printers.
2 Select the printer icon.
3 Click File à Properties.
4 Click the Install Options tab.
5 Add the appropriate options to your configuration:
Memory Card—Increase the printer memory to the desired number (maximum of 160 MB).
Flash Memory Card—Increase the printer flash memory to the desired number (maximum of 32 MB).
250-sheet drawer or 550-sheet drawer—Increase printing capacity by 250 to 550 sheets.
6 Click OK.
To Next Page
Loading...
