Clearing printer jams
48
Clearing jams
6 Lift the flap at the front of the printer, and remove the jammed pages beneath the flap.
CAUTION: Fuser or fuser area may be hot.
7 Open the rear exit, and remove the jammed pages.
8 After you have cleared the jams, reinstall the print cartridge assembly, and make sure all printer doors and trays
are closed.
9 Press .
Note: Jam recovery is set to Auto by default. When jam recovery is set to Auto, the memory that holds the
image of a page may be reused after the page is printed but before it has successfully exited the
printer if that memory is needed for another use. Therefore, a jammed page may or may not be
reprinted, depending on the overall memory usage in the printer.
To Next Page
Loading...
