Loading the manual feeder
23
Printing
Loading the manual feeder
The manual feeder can feed different types of print media, such as a transparency, postcard, note card, or envelope. It can
be used for single-page printing only.
To load print media:
Note: Do not add or remove print media when the printer is printing from the manual feeder or when the
control panel indicator light is blinking. Doing so may cause a jam.
1 Slide the width guides to the outside of the feeder.
2 Place a sheet of the selected print media, print side facing up, at the center fo the manual feeder, but only to the
point where its leading edge can contact the paper guides. Load one sheet of the media in the feeder.
• Hold transparencies by the edges and avoid touching the print side.
• Insert envelopes with the flap side face down.
• Load letterhead faceup, with the top of the sheet entering first.
• If you experience problems with paper feed, turn the paper over.
To Next Page
Loading...
Need help?
General
