Lexmark E460DN - Page 100

Menu item Description
c!#91!' 9?7-3
Login failures
Failure time frame
Lockout time
Login timeout
Limits the number and time frames of failed login attempts from a computer before
all remote users are locked out
Notes:
• “Login failures” specifies the number of failed login attempts before users are
locked out. Settings range from 1–50. 3 attempts is the factory default setting.
• “Failure time frame” specifies the time frame during which failed login attempts
can be made before users are locked out. Settings range from 1–60 minutes. 5
minutes is the factory default setting.
• “Lockout time” specifies how long a user is locked out after exceeding the login
failures limit. Settings range from 0–60 minutes. 5 minutes is the factory default
setting. 0 indicates the printer does not impose a lockout time.
• “Login timeout” specifies how long the remote interface remains idle before
automatically logging the user off. Settings range from 1–900 seconds. 300
seconds is the factory default setting.
89-;7,!-17$E'I%7-1'#!-6
Menu item Description
L$"'P-M$E7,'IPO
Off
2–10
Limits the number of times an invalid PIN can be entered
Notes:
• Off is the factory default setting.
• Once a limit is reached, the jobs for that user name and that PIN are deleted.
`9@'("B7%$179-
Off
1 hour
4 hours
24 hours
1 week
Limits the amount of time a confidential job stays in the printer before it is deleted
Notes:
• Off is the factory default setting.
• If the Job Expiration setting is changed while confidential jobs reside on the
printer RAM, the expiration time for those print jobs does not change to the
new default value.
• If the printer is turned off, all confidential jobs held in printer RAM will be
deleted.
:!F6%71<'D6,71' 9?'#!-6
Menu item Description
("B9%1' 9?
Enables an authorized user to export the security log
Notes:
• To export the log from the printer control panel, a flash drive must be attached
to the printer.
• From the Embedded Web Server, the log can be downloaded to a computer.
a!E!1!' 9?
Delete now
Do not delete
Specifies whether audit reports of print jobs are deleted
Note: Delete now is the factory default setting.
:"5$,%#("5+"/&3,+"#$,&-$"1%
C++