Lexmark E460DN - Page 99

Menu item Description
a!M7F!UP-717$1!,'(U#$7E
None
Use Device Credentials
23!%UP-717$1!,'(U#$7E
None
Use Device SMTP Credentials
a!M7F!'23!%7,
a!M7F!'B$33/9%,
f!%@!%93'J'c!$E#
ON L'a9#$7-
Specifies server information
Notes:
• The message boxes have a limitation of 512 characters.
• None is the factory default setting for Device-Initiated E-mail and
User-Initiated E-mail.
:!F6%71<'#!-6
L73F!EE$-!963'#!-6
Menu item Description
I$-!E' 9?7-3
Login failures
Failure time frame
Lockout time
Login timeout
Limits the number and time frames of failed login attempts from the printer control
panel before all users are locked out
Notes:
• “Login failures” specifies the number of failed login attempts before users are
locked out. Settings range from 1–50. 3 attempts is the factory default setting.
• “Failure time frame” specifies the time frame during which failed login attempts
can be made before users are locked out. Settings range from 1–60 minutes. 5
minutes is the factory default setting.
• “Lockout time” specifies how long users are locked out after exceeding the
login failures limit. Settings range from 0–60 minutes. 5 minutes is the factory
default setting. 0 indicates the printer does not impose a lockout time.
• “Login timeout” specifies how long the printer remains idle on the Home screen
before automatically logging the user off. Settings range from 1–900 seconds.
300 seconds is the factory default setting.
:"5$,%#("5+"/&3,+"#$,&-$"1%
>>