`9@'1$&!3'E9-?!%'1A$-'!"B!F1!,'19'B%7-1
These are possible solutions. Try one or more of the following:
c(a28('NS('8WLI (XPNh'WR'NS('IcPON'`WT
Reduce the number and size of fonts, the number and complexity of images, and the number of pages in the job.
8SDO5('NS('ID5('IcWN(8N':(NNPO5'NW'WRR
1 From the printer control panel, press .
2 Press the down arrow button until Settings appears, and then press .
3 Press the down arrow button until
General Settings appears, and then press .
4 Press the down arrow button until Print Recovery appears, and then press .
5 Press the down arrow button until Page Protect appears, and then press .
6 Press the down arrow button until
Off appears, and then press .
`9@'B%7-13';%9#'1A!'/%9-?'1%$<'9%'9-'1A!'/%9-?'B$B!%
8S(8f'NS('IDI(c'NhI(':(NNPO5
Make sure the Paper Type setting matches the paper loaded in the tray.
P-F9%%!F1'FA$%$F1!%3'B%7-1
Make sure the printer is not in Hex Trace mode. If Ready Hex appears on the display, you must exit Hex Trace mode
before you can print your job. Turn the printer off and back on to exit Hex Trace mode.
N%$<'E7-&7-?',9!3'-91'/9%&
WDa'NS(':DL(':Pe('DOa'NhI('WR'IDI(c'PO'(D8S'NcDh
1 Load the same size and type of paper in each tray.
2 Move the paper guides to the correct positions for the paper size loaded in each tray.
LDf(':2c('NS('IDI(c':Pe('DOa'IDI(c'NhI(':(NNPO5:'Dc('NS(':DL('RWc'(D8S'NcDh
1 Print a menu settings page and compare the settings for each tray.
2 If necessary, adjust the settings from the Paper Size/Type menu.
Note: None of the paper sources, trays, or feeders automatically sense the paper size. You must set the size from
the Paper Size/Type menu on the printer control panel or from the Embedded Web Server.
=,!106$%2!!#+"/
C)J
To Next Page
Loading...
