Lexmark E460DN - Page 94

Network/Ports Network Menu Network Setup NetWare
Menu item Description
DF17M$1!
Yes
No
Activates or deactivates NetWare support
Note: No is the factory default setting.
[7!/' 9?7-'O$#!
Shows the assigned NetWare login name
Note: This can be changed only from the Embedded Web Server.
I%7-1'L9,!
Shows the assigned NetWare print mode
Note: This can be changed only from the Embedded Web Server.
O!1/9%&'O6#@!%
Shows the assigned NetWare network number
Note: This can be changed only from the Embedded Web Server.
:!E!F1':DI'R%$#!3
Ethernet 802.2
Ethernet 802.3
Ethernet Type II
Ethernet SNAP
Enables the Ethernet frame type setting
Notes:
• On is the factory default setting for all menu items.
• Values for each of the Ethernet frame types are On and Off.
I$F&!1'T6%31
Yes
No
Reduces network traffic by allowing the transfer and acknowledgement of
multiple data packets to and from the NetWare server
Note: Yes is the factory default setting.
O:db5:d'L9,!
Yes
No
Specifies the NSQ/GSQ Mode setting
Note: Yes is the factory default setting.
!" 7-&'#!-6
This menu is available from the Network/Ports menu:
Network/Ports Network Menu Network Setup LexLink menu
Menu item Description
DF17M$1!
On
Off
Activates or deactivates LexLink support
Note: Off is the factory default setting.
[7!/'O7F&-$#!
Shows the assigned LexLink nickname
Note: The LexLink nickname can be changed only from the Embedded Web
Server.
:"5$,%#("5+"/&3,+"#$,&-$"1%
>)