Network/Ports Network <x> Net <x> Setup Wireless
Menu item Description
O!1/9%&'L9,!
Infrastructure
Ad hoc
Specifies the network mode
Notes:
• Infrastructure mode lets the printer access a network using an access
point.
• Ad hoc is the factory default setting. Ad hoc mode configures the
printer for wireless networking directly between it and a computer.
89#B$17@7E71<
802.11n
802.11b/g
802.11b/g/n
Specifies the wireless standard for the wireless network
8A993!'O!1/9%&
<list of available networks>
Lets you select an available network for the printer to use
[7!/':7?-$E'd6$E71<
Lets you view the quality of the wireless connection
[7!/':!F6%71<'L9,!
Lets you view the encryption method for the wireless connection.
“Disabled” indicates that the wireless network is not encrypted.
DBBE!N$E&'#!-6
This menu is available from the Network/Ports menu:
Network/Ports Network Menu Network Setup AppleTalk
Menu item Description
DF17M$1!
On
Off
Activates or deactivates AppleTalk support
Note: On is the factory default setting.
[7!/'O$#!
Shows the assigned AppleTalk name
Note: The name can be changed only from the Embedded Web Server.
[7!/'D,,%!33
Shows the assigned AppleTalk address
Note: The address can be changed only from the Embedded Web Server.
:!1'e9-!
<list of zones available on the
network>
Provides a list of AppleTalk zones available on the network
Note: The default setting is the default zone for the network. If no default zone
exists, the zone marked with an * is the default setting.
O!1V$%!'#!-6
This menu is available from the Network/Ports menu:
:"5$,%#("5+"/&3,+"#$,&-$"1%
>G
To Next Page
Loading...
