Lexmark E460DN - Page 92

Menu item Description
(-$@E!'D619'PI
Yes
No
Specifies the Zero Configuration Networking setting
Note: Yes is the factory default setting.
(-$@E!'RNIbNRNI
Yes
No
Enables the built-in FTP server, which allows files to be transferred to the printer
Note: Yes is the factory default setting.
(-$@E!'SNNI':!%M!%
Yes
No
Enables the built-in Web server (Embedded Web Server). When enabled, the printer
can be monitored and managed remotely using a Web browser.
Note: Yes is the factory default setting.
VPO:':!%M!%'D,,%!33
Lets you view or change the current WINS Server Address
aO:':!%M!%'D,,%!33
Lets you view or change the current DNS Server Address
PIM*'#!-6
Use the following menu items to view or set the Internet Protocol version 6 (IPv6) information.
Note: This menu is available only for network models or printers attached to print servers.
This menu is available from the Network/Ports menu:
Network/Ports Network Menu Network Setup IPv6
Menu item Description
(-$@E!'PIM*
On
Off
Enables IPv6 in the printer
Note: On is the factory default setting.
D619'89-;7?6%$179-
On
Off
Specifies whether the network adapter accepts the automatic IPv6
address configuration entries provided by a router
Note: On is the factory default setting.
[7!/'S931-$#!
[7!/'D,,%!33
[7!/'c961!%'D,,%!33
Lets you view the current setting
Note: These settings can be changed only from the Embedded Web
Server.
(-$@E!'aS8IM*
On
Off
Enables DHCPv6 in the printer
Note: On is the factory default setting.
V7%!E!33'#!-6
Use the following menu items to view or configure the wireless internal print server settings.
Note: This menu is available only for models connected to a wireless network.
This menu is available from the Network/Ports menu:
:"5$,%#("5+"/&3,+"#$,&-$"1%
>0