EasyManua.ls Logo

Lexmark Impact S300 Series - Using the Printer Control Panel

Lexmark Impact S300 Series
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
2
6
7
5
4
3
Use the To
1 Scanner glass Scan and copy photos and documents.
2 Power supply with port Connect the printer to a working electrical outlet that is near and easily
accessible.
3 Duplex unit
Print on both sides of a sheet of paper.
Remove paper jams.
Note: The duplex unit is available only on select models.
4 USB port Connect the printer to a computer using a USB cable.
Warning—Potential Damage: Do not touch the USB port except when
plugging in or removing a USB cable or installation cable.
5 Printhead access Install the printhead.
Note: The carrier moves to the printhead access area when no printhead
is installed in the printer.
6 Ink cartridge access Install, replace, or remove ink cartridges.
7 Scanner unit
Access the ink cartridges and printhead.
Remove paper jams.
Using the printer control panel
123456
8910111213
7
ON START
Color
Black
Cancel
2-Sided
Eco-Mode
Use the To
1 Power button
Turn the printer on and off.
Switch to Power Saver mode.
Note: When the printer is on, press
to
switch to Power Saver mode. Press and hold
for three seconds to turn off the printer.
2 Copy button Access the copy menu and make copies.
3 Scan button Access the scan menu and scan documents.
4 Photo button Access the photo menu and print photos.
5 Color/Black Switch to color mode or black-and-white mode.
6 Start button Start a print, scan, or copy job, depending on
which mode is selected.
6

Other manuals for Lexmark Impact S300 Series

Related product manuals