How Do I...?
9
4
How Do I...?
Use this section to find out how to perform the following common tasks related to your print server and network printer.
Print a test page
1 From the Start menu, click Settings → Printers.
2 From the Printers folder, right-click the icon for your network printer.
3 Select Properties from the sidebar menu.
4 From the General tab, click Print Test Page.
Print a print server setup page
Once the print server is installed and the printer is associated with a port, you can print a setup page that lists the network
settings, such as the IP address, Netmask, Gateway, DHCP status, and so on.
Note: Your printer must support a flat text file to print a setup page.
To print a print server setup page, do one of the following:
• From the print server LCD:
1 Press until Menu appears. Press .
2 Press until Reports appears. Press .
3 Press until Setup Page appears. Press .
Note: If your print server has multiple ports, you will be prompted to select a port before the test page will
print.
• If you already know the IP address:
1 Open your browser.
2 Enter the IP address of the print server as the URL. For example, http://192.168.0.1.
3 Click Reports.
4 Click Print Server Setup Page.
5 Click File → Print.
Uninstall the MarkNet N7000 Series software
1 From the Start menu, click Programs or All Programs → Lexmark→ N7000 Series → N7000 Series Software
Uninstall.
2 Follow the instructions on your screen.
To Next Page
Loading...
Need help?
General
