EasyManuals Logo

Lexmark MarkNet N7000E User Manual

Lexmark MarkNet N7000E
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
I don’t know which print server to select
7
Troubleshooting
I don’t know which print server to select
If there are multiple print servers on your network, you can identify the one you are setting up by matching the MAC address
to the Hostname in the list. For example, ET0020000035D0.
My printer is not shown in the list (No Printer Attached)
1 Make sure:
The printer is turned on (check the power indicator light).
The printer is properly connected to the print server (check the USB or parallel cable).
There is not a problem with the printer, USB or parallel cable.
The LCD is on.
The print server is properly connected to the network (check the Ethernet cable).
There is not a problem with your network.
2 Click Refresh.
If the print server is still not shown in the list, continue with the following steps.
3 Click Back.
4 Select Specify Printer by Address/Hostname.
5 Enter the IP Address/Hostname and Port information.
6 Click Next.
7 Continue following the directions on the screen.
MAC address

Other manuals for Lexmark MarkNet N7000E

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexmark MarkNet N7000E and is the answer not in the manual?

Lexmark MarkNet N7000E Specifications

General IconGeneral
BrandLexmark
ModelMarkNet N7000E
CategoryPrint Server
LanguageEnglish

Related product manuals