Lexmark MarkNet N7000E - Use the LCD Features;Options

Use the LCD features/options
11
How Do I...?
Use the LCD features/options
Several menus appear on the print server’s LCD. These menus let you view and configure the print server settings.
Reports Purpose Value
Setup Page Prints a setup page with configuration information. If your model is a 7000e or a
7002e, it prints automatically
when selected.
If your print server is a 7020e, you
must also select a port.
Print Menus Prints a list of available print menus and their
current settings.
If your model is a 7000e or a
7002e, it prints automatically
when selected.
If your print server is a 7020e, you
must also select a port.
Network Card Purpose Value
Card Status Displays whether the network card is connected or
unconnected to the network.
Connected
Not connected
Card Speed Displays the speed of the network connection. Speed in Mbps
Network Address Displays the network address of the print server
as either the MAC address (UAA) or the Locally
Administered Address (LAA).
varies
Display Language Displays the language currently configured for the
print server.
One of several specified
languages
Job Timeout Displays the amount of time the host can remain
idle before terminating print jobs.
varies
Banner Page Enables or disables printing a banner page prior to
each job. The banner page lists information about
the print job.
Note: On the 7020e model, this
feature can be enabled
or disabled for each port.
You must select a port
first.
On
Off
TCP/IP Purpose Value
Hostname Displays the current hostname. varies
Address Configures the IP address. varies
Netmask Configures the Netmask. varies
Gateway Configures the Gateway. varies
Activate Enables or disables TCP/IP. On
Off
Enable DHCP Enables or disables DHCP address configuration
method.
On
Off