NetEase Mail (mail.126.com)
Note: Make sure that the SMTP service is enabled on your
account. To enable the service, from the NetEase Mail home
page, click Settings > POP3/SMTP/IMAP, and then enable
either IMAP/SMTP service or POP3/SMTP service.
Setting Value
Primary SMTP Gateway smtp.126.com
Primary SMTP Gateway Port 465
Use SSL/TLS Required
Require Trusted
Certificate
Disabled
Reply Address Yo u r e ‑mail address
SMTP Server Authentication Login / Plain
Device‑Initiated E‑mail Use Device SMTP Credentials
Device UserID Yo u r e ‑mail address
Device Password Authorization password
Note: The authorization
password is provided when
IMAP/SMTP service or
POP3/SMTP service is
enabled.
NetEase Mail (mail.yeah.net)
Note: Make sure that the SMTP service is enabled on your
account. To enable the service, from the NetEase Mail home
page, click Settings > POP3/SMTP/IMAP, and then enable
either IMAP/SMTP service or POP3/SMTP service.
Setting Value
Primary SMTP Gateway smtp.yeah.net
Primary SMTP Gateway Port 465
Use SSL/TLS Required
Require Trusted
Certificate
Disabled
Reply Address You r e ‑mail address
SMTP Server Authentication Login / Plain
Device‑Initiated E‑mail Use Device SMTP Credentials
Device UserID Yo u r e ‑mail address
Setting Value
Device Password Authorization password
Note: The authorization
password is provided when
IMAP/SMTP service or
POP3/SMTP service is
enabled.
Sohu Mail
Note: Make sure that the SMTP service is enabled on your
account. To enable the service, from the Sohu Mail home page,
click Options > Settings > POP3/SMTP/IMAP, and then enable
either IMAP/SMTP service or POP3/SMTP service.
Setting Value
Primary SMTP Gateway smtp.sohu.com
Primary SMTP Gateway Port 465
Use SSL/TLS Required
Require Trusted Certificate Disabled
Reply Address Yo u r e ‑mail address
SMTP Server
Authentication
Login / Plain
Device‑Initiated E‑mail Use Device SMTP Credentials
Device UserID Yo u r e ‑mail address
Device Password Independent password
Note: The independent
password is provided when
IMAP/SMTP service or
POP3/SMTP service is enabled.
Sina Mail
Note: Make sure that the POP3/SMTP service is enabled on
your account. To enable the service, from the Sina Mail home
page, click Settings > More settings > User
‑
end
POP/IMAP/SMTP, and then enable POP3/SMTP service.
Setting Value
Primary SMTP Gateway smtp.sina.com
Primary SMTP Gateway
Port
587
Setting Value
Use SSL/TLS Required
Require Trusted
Certificate
Disabled
Reply Address Yo u r e ‑mail address
SMTP Server
Authentication
Login / Plain
Device‑Initiated E‑mail Use Device SMTP Credentials
Device UserID Yo u r e ‑mail address
Device Password Authorization code
Note: To create an authorization
code, from the e‑mail home page,
click Settings > More settings >
User‑end POP/IMAP/SMTP, and
then enable Authorization code
status.
Notes:
•
If you encounter errors using the settings provided, then
contact your e
‑
mail service provider.
•
For e
‑
mail service providers that are not on the list, contact
your provider and ask for the settings.
Sending an e-mail
Before you begin, make sure that the SMTP settings are
configured. For more information, see
“Configuring the e
‑
mail
SMTP settings” on page 1.
Using the control panel
1
Load an original document into the ADF tray or on the scanner
glass.
2
From the home screen, touch E-mail, and then enter the
needed information.
If necessary,
configure
the output
file
type settings.
3
Send the e-mail.
Using a shortcut number
1
Create an e
‑
mail shortcut.
a
Open a web browser, and then type the printer IP address
in the address field.
4
To Next Page
Loading...
